modulo-zigbee-per-dispositivi-oem-zr-br-bmh-m-zr-br-bmv-m-1

ZR-BR-BMX-M

ZigBee Module for OEM Devices

  • No RF and ZigBee expertise requested
  • Bridge function between the OEM device and the 4-noks ZigBee network
  • Horizontal and vertical version
  • Using Modbus/RTU protocol with TTL (3,3V)
  • interface
  • Routing function
  • RF power 2mW
  • Antenna on-board

btm-scarica-scheda-en
btm-richiedi-info-en

ZigBee Module for OEM ZR-BR-BMH-M ZR-BR-BMV-M Devices

The ZR-BR-BMH-M and ZR-BR-BMV-M modules have the task to connect through ZB-Connection network an OEM device to one of the Gateways of the 4-noks range. Thus the PLC or the PLC/Scada connected to the Gateway can exchange information with the OEM device, not needing for a wired connection anymore.
The OEM device has to use the TTL interface with Modbus RTU protocol.
Moreover, the module covers the function of routing and can work as a “father” device for the battery supplied sensors.

Technical Specs
General characteristics
Chip Ember EM2420
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
Modbus/RTU
RF characteristics Frequency: 2405 MHz ÷ 2480 MHz
Modulation: DSSS
Nominal transmission power: 2mW (3 dBm)
Receiver sensitive: -95 dBmm
Internal antenna gain: 0 dB
Outdoor/indoor range: 100m/30m
Supply Strip 2,54mm
Connection 3,3 Vcc (±10%); 50mA
Environment parameters
Operating temperature: -10 ÷ +60°C; <80% U.R. non condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. non condensing
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives
Product law applied
ETSI EN 300 328: Radio Compatibility for digital wide band transmissions
ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility – Emissions
EN 61000-6-3: Electromagnetic Compatibility – Immunity
EN 60950-1: Electric Security