Portable Network Analyzer
Z-HANDZER-M Portable Network Analyzer
The Z-HANDZER-M portable network analyzer is very useful while building a network made of ZB-Connection devices. There are not required specific competencies to use this device.
Its function is to detect how many router devices are present within its radio range, thes allows to stimate almost exactly whether the phisycal part chosen for a new device was enough connected with the network infrastructure.
Once installed it allows to verify the coverage of a certain area of the network, the presence of malfunctionings in the routers and, eventually, the best possible position to install new routers that become necessary.
Chip Ember EM2420
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
|RF characteristics||Frequency: 2405 MHz ÷ 2480 MHz
Nominal transmission power: 1mW (0 dBm)
Receiver sensitive: -90 dBm
External antenna gain: 0 dB
Outdoor/indoor range: 100m/30m
|Supply||3 AAA 1,5V Batteries|
Operating temperature: -10 ÷ +60°C; <80% U.R. non condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. non condensing
Degree of protection: IP 40
|Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives
Product law applied
|ETSI EN 300 328: Radio Compatibility for digital wide band transmissions
ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility – Emissions
EN 61000-6-3: Electromagnetic Compatibility – Immunity
EN 60950-1: Electric Security